Overclocking error on startup

It basically means that the last Power On Self Test (POST) failed. Unless you are in the process of overclocking the system and used settings that didn't work for your hardware it has nothing to do with overclocking. I am attempting to overclock the CPU. I'm a pretty big noob when it comes to PCs (been Mac most my life) so all I'm trying to do is use the preconfigured Asus Optimized setting and the XMP and TPU (1) switches on the motherboard (X-99 DELUXE).

The “whea uncorrectable error” message that you get on Windows 8.1 on a blue screen can be caused by two things. I decided to try overclocking for the first time. Problem is my PC will no longer boot to windows.

How to fix overclocking failed error Sanuja Senanayake

This programs with new Crimson Driver, makes a problem like a black screen when you opened a computer. Can't do anything except Safe mode.

Restart now button under Advanced startup. When your computer restarts you'll enter the Windows 8.1 boot options menu. First of all let me make it clear that overclocking basically means to over-work your hardware and make it operate beyond what it was designed to do. This .First of all let me make it clear that overclocking basically means to over-work your hardware and make it operate beyond what it was designed to do.

This can sometimes result in permanent damage to your hardware.

What to do if you get Overclocking Failed message in BIOS - YouTube

Computer users frequently encounter CMOS Checksum Bad Error for many reasons. This error may be frustrating, but the good part is that it can be solved easily. At this point, I want to come back to the latest known good settings for the boot/config.txt file. Sometimes changing the settings in BIOS, like Overclocking the RAM or processor and cause instability for the system.

In such cases, reset the BIOS to default settings or reset it by removing CMOS for a minute and put it back. Consider the following situation: You’ve overclocked your CPU, set the core voltage (Vcore) to some reasonable number, and then it’s time for some stress testing to make sure your rig is stable. You follow all the standard recommendations that you can find on overclocking forums: you run Prime95 for 12-24 hours, do a few hours of FurMark, and a few hours of IntelBurnTest for good measure.

Overclocking Failed Errors - Puget Custom Computers

If you wish to try the Startup Repair option first, it is often successful in automatically fixing many different start up issues, but in this article we will be using the Command Prompt option to resolve our problems manually. So, click Command Prompt to continue.BIOS at startup or with physical jumpers on the motherboard. Corrupted ProgramIf OverDrive was working fine before and suddenly stops working without reason, there's a good chance the program's installation is corrupted, which means that a file is no longer usable because a hardware or software error occurred when editing a file and recorded incomplete data -- for example, you could have lost power when updating an OverDrive setting. MS-DOS startup disk under Windows XP, right click on the 3.5” floppy drive icon under my computer and select format. If, under this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you might be able to use Safe Mode to rename or delete the faulty driver.

If the driver is used as part of the system startup process in Safe Mode, start the computer using the Recovery Console in order to access the file. I tried booting from my Dell Windows XP disc that came with the laptop, but when I get to the screen that says press any key to boot from disc, i hear the disc spinning and then it says checking configuration, then just a black screen. I've waited 10 minutes and nothing happens.